Retro Balloons are round latex balloons selected primarily for muted Retro and Morandi-inspired color directions rather than bright standard color palettes. Borun Balloon Factory supplies Retro Balloons for wholesalers, importers, party-supply distributors and e-commerce sellers in 5, 10, 12, 18 and 36 inch size classes. A useful wholesale inquiry should identify the required Retro color, balloon size, applicable gram weight and quantity. The standard minimum order quantity is 5,000 pieces, with physical samples normally prepared in 3–5 working days where specification or color approval is required.
The defining product characteristic is the muted Retro / Morandi color family. Retro Balloons should not be treated as another name for every Matte Latex Balloon or Macaron Latex Balloon. Matte describes a surface category, while Macaron describes a lighter pastel color family. Retro identifies a separate muted color direction that wholesalers often purchase as a coordinated color program.
The term Retro Balloons covers more than one individual size or color. Before Borun Balloon Factory can prepare a comparable wholesale quotation, the purchasing requirement should move from the broad Retro Balloon category to an exact combination of Retro color + balloon size + gram weight + quantity.
This short specification summary helps wholesalers identify the required Retro Balloon before requesting a quote. Detailed purchasing decisions for an individual size should remain tied to that exact size specification.
| Retro Balloon Size | Current Gram-Weight Reference | Information to State in the RFQ |
|---|---|---|
| 5 inch | 1.1g | 5 inch / 1.1g + required Retro color + quantity |
| 10 inch | 1.5g / 1.8g / 2.2g | Exact 10-inch gram weight + Retro color + quantity |
| 12 inch | 2.8g / 3.2g | Exact 12-inch gram weight + Retro color + quantity |
| 18 inch | 10g | 18 inch / 10g + required Retro color + quantity |
| 36 inch | 35g | 36 inch / 35g + required Retro color + quantity |
Retro Balloon size selection should be specific. A request for “small Retro Balloons,” “standard Retro Balloons” or “large Retro Balloons” does not provide enough information for a comparable factory quotation.
Wholesalers should state the exact 5, 10, 12, 18 or 36 inch size and the applicable gram weight. For 10-inch and 12-inch Retro Balloons, the RFQ should also identify which available gram-weight specification is required.
Retro Balloon color selection is a major part of the purchasing decision. Borun's Retro color references include muted pink, softened green, warm earth, muted yellow and deeper blue directions. Exact color names and current availability should be confirmed from the current Borun color reference or physical sample.
Send the target Retro color, balloon size, gram weight and quantity. Borun Balloon Factory can confirm the requested Retro Balloon specification and whether a physical sample is required before preparing a wholesale quotation. The same information can be sent through the website WhatsApp floating window or online chat.
Xiongxian Borun Latex Products Co., Ltd. has manufactured balloons in Xiongxian, Hebei since 2006. Borun Balloon Factory operates 15 balloon production lines across multiple balloon categories. Five lines are allocated to Latex Balloon forming and three additional lines are allocated to Custom Printed Latex Balloon production.
For a Retro Balloon wholesale order, the relevant manufacturing record connects the confirmed Retro color, balloon size, gram weight, quantity and packaging requirement with the scheduled Latex Balloon production work. The factory-level production-line count is not presented as dedicated Retro Balloon capacity.
Physical sample: where a sample is required, Borun Balloon Factory normally prepares the sample in 3–5 working days after the Retro color, balloon size, gram weight and relevant packaging requirement have been confirmed. The physical sample should correspond to the specification being considered for bulk purchasing.
Wholesale packaging: state the total quantity separately from pieces per bag or finished package format. Borun Balloon Factory can coordinate customized balloon packaging through its long-term affiliated packaging manufacturing partner where a private-label package is required.
Packaging should be recorded as part of the exact Retro Balloon purchasing specification. Party-supply distributors and e-commerce sellers should confirm pieces per bag, finished package format and private-label artwork requirement where applicable.
The affiliated packaging manufacturing partner is separate from Borun's in-house Latex Balloon production, so customized balloon packaging is described as a coordinated service rather than in-house packaging manufacturing.
Custom printing is reviewed after the base Retro Balloon color, size and gram weight have been confirmed. Standard custom printed Latex Balloon orders start at 5,000 pieces per design. Screen printing supports 1–6 print colors and up to 5-side printing where the confirmed Retro Balloon and approved artwork allow. Pantone references and AI, EPS or PDF vector artwork are preferred for artwork review.
Compliance documentation should be reviewed against the confirmed Retro Balloon specification and destination-market requirement rather than treated as universal evidence for every Latex Balloon color, size or configuration.
Applicable EN 71-1/2/3 documentation and an EU Declaration of Conformity can also be reviewed for the confirmed order where relevant. Importers should state the destination market when requesting compliance documentation.
Send the required Retro color, balloon size, gram weight, quantity, pieces per bag, packaging requirement, destination country and requested delivery date. For custom printed Retro Balloons, also provide the artwork file, print colors and print positions.
Retro Balloons are round latex balloons selected primarily for muted Retro and Morandi-inspired color directions. A complete wholesale purchasing specification should identify the required Retro color, balloon size, applicable gram weight, quantity and packaging.
No. Retro primarily identifies a muted color family, while Matte identifies a surface category. A specific balloon can combine more than one attribute, but Retro Balloons and Matte Balloons should not be treated as interchangeable wholesale purchasing categories.
Borun's current Latex Balloon system uses 5 inch at 1.1g; 10 inch at 1.5g, 1.8g or 2.2g; 12 inch at 2.8g or 3.2g; 18 inch at 10g; and 36 inch at 35g. The requested Retro color should be confirmed for the selected size and gram-weight combination.
Retro Balloon programs use muted color directions such as Dusty Pink, softened green, warm earth tones, muted yellow and deeper blue. Exact color names and current availability should be confirmed from the current Borun color reference or physical sample.
The standard Latex Balloon minimum order quantity is 5,000 pieces. For custom printed Retro Balloons, the standard minimum order quantity is 5,000 pieces per design.
Yes, where a physical sample is required. Sample preparation normally takes 3–5 working days after the Retro color, balloon size, gram weight and relevant packaging requirement have been confirmed.
Yes. Custom printed Latex Balloon orders start at 5,000 pieces per design, with 1–6 print colors and up to 5-side printing where the confirmed balloon and artwork allow. Customized balloon packaging can be coordinated through Borun Balloon Factory's long-term affiliated packaging manufacturing partner.
Provide the required Retro color, balloon size, gram weight, quantity, pieces per bag, packaging requirement, destination country and requested delivery date. Include artwork, print colors and print positions when custom printing is required.
